| |
|
Complex spacer of high-strength graphite and metal |
|
|
|
|
| |
 |
Name of product |
Explanation |
Type |
Temper-ature |
Pressure |
Specifi-cation |
Thick-ness |
The expansion graphite and metal twine the spacer
SW-G001-SW-G004 |
Metal twine spacer by metal thin to bring with nonmetal soft packing pile
shutting Model V, the spiral was coiled, the extreme point of the whole story
was welded . The elasticity that good compression will go back, suitable
temperature , strong sealed position of pressure reversal, it is pipeline ,
valve, such laws as the pump , heat exchanger , tower , manhole , hand hole
,etc. link the sealed component of the place . Used in such departments as
petrochemical industry , machinery , electric metallurgy , shipbuilding ,
medicine , atomic energy and space flight ,etc. extensively. |
SW-G001
Basic model |
-200℃～
870℃ |
420kgf
/cm*cm |
16mm
3000mm |
2.5mm
3.2mm |
SW-G002
Take the Inner Loop |
SW-G003
Take the External Loop |
3.2mm
4.5mm |
SW-G004
Take the internal and external ring |
 |
High-strength spacer of graphite
SW-005 |
By the complex board SW-S01 of high-strength graphite --SW-S-04 was washed and
cut . The excellent one is able to bear corrosivity , able to bear the high low
temperature; Elasticity , better intensity that good compression will go back.
It is the sealed components of tube , valve , pump , pressure container , heat
exchanger , condenser ,etc., can also is it cut form complicated spacer to wash,
fluviograph spacer for instance , wash bolt hole flange spacer ,etc..
|
SW-G005 |
-200℃
～600℃
|
200kgf
/cm*cm |
10mm
3000mm |
1.2-
4.5mm |
High-strength spacer of the type by wrapping up
SW-006 |
Improvement on it is it is for SW-G005,inside and outside enclose not wrapping
up it for thin slice not metal. Keep already existing several excellent
performance , and easy to install, dismantle and resist , it is difficult to
damage . |
SW-G006 |
 |
Shape spacer of metal tooth
SW-007
|
Suitable high temperature , high pressure . Can be used in the pressure
container , tower , valve , chlorine jar the sealed position of overlaying etc..
The biggest external diameter is 100OMM, use temperature to be 800OC at most
,,The pressure is 1000kgf/cm*cm。 |
SW-G007 |
800℃ |
1000kgf
/cm*cm |
20mm
1000mm |
2.0-
4.5mm |
 |
A roll of material of expansion graphite
SW-005 |
Suppress the packing ring ; Roll and cut the strip; Paste it on the surface of all kinds of spacers , improve the sealing property; Twine the spacer and pack the material softly. |
700mm*30M
1000mm*30M |
-200℃
～800℃ |
100kgf
/cm*cm |
Density
0.8-1.2 |
0.2-
0.8mm |
 |
The (PTFE) seals bringing
SW-006 |
Special craft pure (PTFE) succeeded to process bring, the back encloses and keeps the quick sticky tape . The excellent one is able to bear corrosivity, good flexibility is easy to use, in being , low-temperature medium , permit pollution medium , enamel, glass , coarseness , abnormal shape seal ideal sealed material of. |
Width:3mm,
6mm,9mm,
12mm |
-268℃
～260℃ |
200kgf
/cm*cm |
Density
<1.0g/cm |
3.0mm
5.0mm |
|
|
|
