| 
Gasket description |
Compressed sheet material base on carbon fibre with a high quality nitrile rubber binder and wide ranged of sealing application with in low temperature and low pressure. |
Colour |
Red |
Maximum operating pressure |
40bar |
Maximum short te-
rm service tempe- rature
|
210℃ |
Maximum continuo-
us service tempe- rature
|
140℃ |
Maximum operating temperature for steam |
120℃ |
The maximum temperature and pressure cannot necessarily be used simultaneously and the operating temperature is related to the thickness of materials selected. Thinner materials offer better temperature and pressure properties. |
Thickness |
0.5ｍｍ～4.0ｍｍ |
Standard sheet size |
1.5ｍ×1.5ｍ |
following sizes |
2.0ｍ×1.5ｍ 2.0ｍ×1.0ｍ 1.5ｍ×1.0ｍ |
maximum size |
6.0×2.0ｍ |
|
Thickness |
|
1.5mm |
Density |
|
1.8g/cm3 |
Compressibility |
ASTMB 36 |
9.0% |
Recovery |
ASTMB 36 |
45% |
Residual stress |
DIN 52913 |
20Mpa |
Gas leakage |
BS 7531 |
0.8ml/min |
Oil resistance |
|
|
ASTM Fuel B |
Add thickness |
10.0% |
TEMASIL
Gasket description |
Sheet material base on heat-resisted carbon fibre with a high quality nitrile rubber binder |
Colour |
Blue |
Maximum operating
pressure |
100bar |
Maximum short te-
rm service tempe-
rature |
400℃ |
Maximum continuo-
us service tempe-
rature |
250℃ |
Maximum operating
temperature for
steam |
200℃ |
The maximum temperature and pressure cannot necessarily be used simultaneously and the operating temperature is related to the thickness of materials selected. Thinner materials offer better temperature and pressure properties.
|
Thickness |
0.5ｍｍ～4.0ｍｍ |
Standard sheet size |
1.5ｍ×1.5ｍ |
following sizes |
2.0ｍ×1.5ｍ 2.0ｍ×1.0ｍ 1.5ｍ×1.0ｍ |
maximum size |
6.0×2.0ｍ |
|
Thickness |
|
1.5mm |
Density |
|
1.9g/cm3 |
Compressibility |
ASTMB 36 |
8.0% |
Recovery |
ASTMB 36 |
11% |
Residual stress |
DIN 52913 |
55% |
Gas leakage |
BS 7531 |
0.5ml/min |
Oil resistance |
|
|
ASTM Fuel B |
Add thickness |
5.0% |
MOTORIT H5/E
Gasket description |
The asbestos free compressed sheet material with stainless steel mesh reinforcement especially suitable for sealing in strong stress and high temperature. It has high resistance to lubricant oil and refrigerants. |
Colour |
Dark gray |
Application field |
Suitable for sealing of the head of cylinder of engine and air intake and air exit. |
Maximum operating pressure |
100bar |
Maximum service temperature |
200℃ |
The maximum temperature and pressure cannot necessarily be used simultaneously and the operating temperature is related to the thickness of materials selected. Thinner materials offer better temperature and pressure properties. |
Standard sheet size |
1.5ｍ×1.0ｍ |
Thickness |
0.8, 1.0, 1.2, 1.5, 2.0ｍｍ |
|
Thickness |
|
1.5mm |
Density |
|
2.4~3.1g/cm3 |
Compressibility |
ASTMB 152 |
12Mpa |
Recovery |
ASTMB 36 |
11% |
Residual stress |
ASTMB 36 |
40% |
Gas leakage |
|
|
Oil resistance |
Add thickness |
10.0% |
ASTM Fuel B |
Add thickness |
8.0% |
Novus® 30
images/000.j
Gasket description
|
Novus 30 is already known by the name of NOVUS SUPRA, a top gradecompressed synthetic fibre sheet material.It consists of a blend ofpolyaramid and inorganic fibres with a superior nitrile rubber binder.
|
Colour |
Orange |
Application field |
Novus 30 is a general purpose material suitable for use in applications involving hot and cold water, steam, oils, fuels, gases and a wide range of general chemicals.
|
Maximum operating pressure |
100bar |
Maximum short te-
rm service tempe- rature |
400℃ |
Maximum continuo-
us service tempe- rature |
250℃ |
Maximum operating temperature for steam |
200℃ |
The maximum temperature and pressure cannot necessarily be used simultaneously and the operating temperature is related to the thickness of materials selected. Thinner materials offer better temperature and pressure properties. |
Characteristics and approvals: |
NOVUS 30 is registered under DIN-DVGW Reg. No. 93.01 e 845 (in accordance with DIN 3535 part 6FA) for use in gas applications.
NOVUS 30 complies with the requirements of BS 7531 Grade Y.WRC (Water Research Council) UK BS 6920 Listing No. 9508502 for drinking water applications
|
Thickness |
0.25ｍｍ～6.0ｍｍ |
Standard sheet size
|
1.5ｍ×1.5ｍ |
Following sizes |
2.0ｍ×2.0ｍ 2.0ｍ×1.5ｍ 2.0ｍ×1.0ｍ 1.5ｍ×1.0ｍ |
Maximum size |
6.0×2.0ｍ |
Property |
Thickness |
|
1.5mm |
Density |
|
2.0g/cm3 |
Tensile strength |
ASTMB 152 |
12Mpa |
Compressibility |
ASTMB 36 |
9.0% |
Recovery |
ASTMB 36 |
50% |
Residual stress |
BS 7531 |
23Mpa |
DIN 52913 |
29Mpa |
Gas leakage |
BS 7531 |
0.5ml/min |
Oil resistance |
|
|
ASTMB Oil NO 1 |
Add thickness |
2.0% |
ASTMB Oil NO 3 |
Add thickness |
5.0% |
ASTM Fuel B |
厚度增加 |
4.0% |
Novus® 34
Gasket description
|
Novus®34 is a superior performance compressed sheet material incorporating a blend of special heat resisting fibres with a high qualitynitrile rubber binder. |
Colour
| natural |
Application field |
Novus 34 is a general purpose material for use with oils, solvents, gases,steam and most dilute acids and alkalis.
|
Maximum operating pressure |
160bar |
Maximum short te-
rm service tempe- rature |
450℃ |
Maximum continuo-
us service tempe- rature |
250℃ |
Maximum operating temperature for steam |
250℃ |
The maximum temperature and pressure cannot necessarily be used simultaneously and the operating temperature is related to the thickness of materials selected. Thinner materials offer better temperature and pressure properties. |
Characteristics and approvals: |
NOVUS 30 is registered under DIN-DVGW Reg. No. 93.01 e 845 (in accordance with DIN 3535 part 6FA) for use in gas applications.
NOVUS 30 complies with the requirements of BS 7531 Grade Y.
WRC (Water Research Council) UK BS 6920 Listing No. 9508502 for drinking water applications
|
Thickness |
0.25ｍｍ～6.0ｍｍ |
Standard sheet size |
1.5ｍ×1.5ｍ |
Following sizes |
2.0ｍ×2.0ｍ 2.0ｍ×1.5ｍ 2.0ｍ×1.0ｍ 1.5ｍ×1.0ｍ |
Maximum size |
6.0×2.0ｍ |
It is can bring metal pore network silk strengthen the spacer to offer: NOVUS®34 METALLIC
Offer and defend the static spacer
Property |
Thickness |
|
1.5mm |
Density |
|
1.65g/cm3 |
Tensile strength |
ASTMB 152 |
15Mpa |
Compressibility |
ASTMB 36 |
12% |
Recovery |
ASTMB 36 |
55% |
Residual stress |
BS 7531 |
26Mpa |
DIN 52913 |
32Mpa |
Gas leakage |
BS 7531 |
0.1ml/min |
Oil resistance |
|
|
ASTMB Oil NO 1 |
Add thickness |
1.0% |
ASTMB Oil NO 3 |
Add thickness |
2.0% |
ASTM Fuel B |
Add thickness |
3.0% |
Novus®Acid
Novus® Acid
Gasket description |
Novus®Acid
is a compressed non-asbestos sheet material specially formulated grade based on a blend of fibres with an acid resistant binder system. |
Colour |
Gray
|
Application field |
Novus®Acid is designed to withstand aggressive chemical enviroments. chemical grade material suitable for most acids, alkalis, oils, fuels and refrigerants. |
Maximum operating pressure |
60bar |
Maximum continuo-
us service tempe-
rature |
200℃ |
Maximum operating
temperature for
steam |
150℃ |
The maximum temperature and pressure cannot necessarily be used simultaneously and the operating temperature is related to the thickness of materials selected. Thinner materials offer better temperature and pressure properties. |
Thickness |
0.4ｍｍ～3.0ｍｍ |
Standard sheet size |
1.5ｍ×1.5ｍ |
Following sizes |
2.0ｍ×2.0ｍ 2.0ｍ×1.5ｍ 2.0ｍ×1.0ｍ 1.5ｍ×1.0ｍ |
Maximum size |
6.0×2.0ｍ |
Property |
Thickness |
1.5mm |
Density |
1.75g/cm3 |
Tensile strength |
ASTMB 152 |
11Mpa |
Compressibility |
ASTMB 36 |
10% |
Recovery |
ASTMB 36 |
50% |
Gas leakage |
BS 7531 |
0.1ml/min |
Oil resistance |
|
95%H2SO4 |
Add thickness |
16% |
36%H2SO4 |
Add thickness |
15% |
50%H2SO4 |
Add thickness |
7.0% |
|
